Direct Quantitation of SARS-CoV-2 Virus in Urban Ambient Air via a Continuous-Flow Electrochemical Bioassay.

Airborne SARS-CoV-2 virus surveillance faces challenges in complicated biomarker enrichment, interferences from various non-specific matters and extremely low viral load in the urban ambient air, leading to difficulties in detecting SARS-CoV-2 bioaerosols. This work reports a highly specific bioanalysis platform, with an exceptionally low limit-of-detection (≤1 copy m-3 ) and good analytical accordance with RT-qPCR, relying on surface-mediated electrochemical signaling and enzyme-assisted signal amplification, enabling gene and signal amplification for accurate identification and quantitation of low doses human coronavirus 229E (HCoV-229E) and SARS-CoV-2 viruses in urban ambient air. This work provides a laboratory test using cultivated coronavirus to simulate the airborne spread of SARS-CoV-2, and validate that the platform could reliably detect airborne coronavirus and reveal the transmission characteristics. This bioassay conducts the quantitation of real-world HCoV-229E and SARS-CoV-2 in airborne particulate matters collected from road-side and residential areas in Bern and Zurich (Switzerland) and Wuhan (China), with resultant concentrations verified by RT-qPCR.

Bifunctional three-way DNA junction-based strand displacement recycling for amplifiable electrochemical bivariate biosensing

It's intriguing to utilize the branched arms of three-way DNA junction (3WDJ) for modifying specific recognizing and/or sensing elements of multivariate analytes. Herein, by using two targeting DNA segments (T and T*) specific to SARS-CoV-2 as analyte models, an electrochemical bivariate biosensor was created based on a functional 3WDJ including two -NH2-labeled recognizable probes (RP and RP*) and an assistant probe (AP), while its two branched arms hybridized with four helping DNA blockers. In the electrode surface electrodeposited in HAuCl4, the 3WDJ was stably immobilized via Au-N bonds to specifically recognize and bind T and T*, with which two modified signaling probes by electroactive methylene blue (SP-MB) and ferrocene (SP*-Fc) were introduced to initiate two strand displacement reactions. Resultantly, SP-MB and SP*-Fc were guided to be complementarily hybridized in two arms of 3WDJ, replacing T and T* to execute two individual repeatable recycling for signal amplification. Thus, MB and Fc were oriented proximal to the modified electrode surface for significantly increased electrochemical current signals, respectively dependent on T and T*. With the branched arms of rapidly assembled 3WDJ, the discernible detection of bivariate targets was achievable, showing superb simplification, high sensitivity, and potentially more accurate electrochemical assay of multivariate targets. Data Availability Data will be made available on request.

Recent advances in cascade isothermal amplification techniques for ultra-sensitive nucleic acid detection.

Nucleic acid amplification techniques have always been one of the hot spots of research, especially in the outbreak of COVID-19. From the initial polymerase chain reaction (PCR) to the current popular isothermal amplification, each new amplification techniques provides new ideas and methods for nucleic acid detection. However, limited by thermostable DNA polymerase and expensive thermal cycler, PCR is difficult to achieve point of care testing (POCT). Although isothermal amplification techniques overcome the defects of temperature control, single isothermal amplification is also limited by false positives, nucleic acid sequence compatibility, and signal amplification capability to some extent. Fortunately, efforts to integrating different enzymes or amplification techniques that enable to achieve intercatalyst communication and cascaded biotransformations may overcome the corner of single isothermal amplification. In this review, we systematically summarized the design fundamentals, signal generation, evolution, and application of cascade amplification. More importantly, the challenges and trends of cascade amplification were discussed in depth.

CRISPR-Cas assisted diagnostics: A broad application biosensing approach

In addition to its remarkable genome editing capability, the CRISPR-Cas system has proven to be very effective in many fields of application, including the biosensing of pathogenic infections, mutagenic defects, or early cancer diagnosis. Thanks to their many advantages in terms of simplicity, efficiency, and reduced time, several CRISPR-Cas systems have been described for the design of sensitive and selective analytical tools, paving the way for the development and further commercialization of next-generation diagnostics. However, CRISPR-Cas-based biosensors still need further research efforts to improve some drawbacks, such as the need for target amplification, low reproducibility, and lack of knowledge of exploited element robustness. This review aims to describe the latest trends in the design of CRISPR-Cas biosensing technologies to better highlight the insights of their advantages and to point out the limitations that still need to be overcome for their future market entry as medical diagnostics.Copyright © 2023 Elsevier B.V.

Enhanced Single-Particle Collision Electrochemistry at Polysulfide-Functionalized Microelectrodes for SARS-CoV-2 Detection.

Single-particle collision electrochemistry (SPCE) has shown great promise in biosensing applications due to its high sensitivity, high flux, and fast response. However, a low effective collision frequency and a large number of interfering substances in complex matrices limit its broad application in clinical samples. Herein, a novel and universal SPCE biosensor was proposed to realize sensitive detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) based on the collision and oxidation of single silver nanoparticles (Ag NPs) on polysulfide-functionalized gold ultramicroelectrodes (Ps-Au UMEs). Taking advantage of the strong interaction of the Ag-S bond, collision and oxidation of Ag NPs on the Ps-Au UME surface could be greatly promoted to generate enhanced Faraday currents. Compared with bare Au UMEs, the collision frequency of Ps-Au UMEs was increased by 15-fold, which vastly improved the detection sensitivity and practicability of SPCE in biosensing. By combining magnetic separation, liposome encapsulation release, and DNAzyme-assisted signal amplification, the SPCE biosensor provided a dynamic range of 5 orders of magnitude for spike proteins with a detection limit of 6.78 fg/mL and a detection limit of 21 TCID50/mL for SARS-CoV-2. Furthermore, SARS-CoV-2 detection in nasopharyngeal swab samples of infected patients was successfully conducted, indicating the potential of the SPCE biosensor for use in clinically relevant diagnosis.

Lateral Flow Immunoassay Coupled with Copper Enhancement for Rapid and Sensitive SARS-CoV-2 Nucleocapsid Protein Detection.

The coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory coronavirus 2 (SARS-CoV-2) is still raging all over the world. Hence, the rapid and sensitive screening of the suspected population is in high demand. The nucleocapsid protein (NP) of SARS-CoV-2 has been selected as an ideal marker for viral antigen detection. This study describes a lateral flow immunoassay (LFIA) based on colloidal gold nanoparticles for rapid NP antigen detection, in which sensitivity was improved through copper deposition-induced signal amplification. The detection sensitivity of the developed LFIA for NP antigen detection (using certified reference materials) under the optimized parameters was 0.01 µg/mL and was promoted by three orders of magnitude to 10 pg/mL after copper deposition signal amplification. The LFIA coupled with the copper enhancement technique has many merits such as low cost, high efficiency, and high sensitivity. It provides an effective approach to the rapid screening, diagnosis, and monitoring of the suspected population in the COVID-19 outbreak.

An ultrasensitive ELISA to assay femtomolar level SARS-CoV-2 antigen based on specific peptide and tyramine signal amplification.

The SARS-CoV-2 spreading rapidly has aroused catastrophic public healthcare issues and economy crisis worldwide. It plays predominant role to rapidly and accurately diagnose the virus for effective prevention and treatment. As an abundant transmembrane protein, spike protein (SP) is one of the most valuable antigenic biomarkers for diagnosis of COVID-19. Herein a phage expression of WNLDLSQWLPPM peptide specific to SARS-CoV-2 SP was screened. Molecular docking revealed that the isolated peptide binds to major antigenic epitope locating at S2 subunit with hydrogen bonding. Taking the specific peptide as antigen sensing probe and tyramine signal amplification (TSA), an ultrasensitive "peptide-antigen-antibody" ELISA (p-ELISA) was explored, by which the limit of detection (LOD) was 14 fM and 2.8 fM SARS-CoV-2 SP antigen for first TSA and secondary TSA, respectively. Compared with the LOD by the p-ELISA by direct mode, the sensitivity with 2nd TSA enhanced 100 times. Further, the proposed p-ELISA method can detect SARS-CoV-2 pseudoviruses down to 10 and 3 TCID50/mL spiked in healthy nasal swab sample with 1st TSA and 2nd TSA, separately. Thus, the proposed p-ELISA method with TSA is expected to be a promising ultrasensitive tool for rapidly detecting SARS-CoV-2 antigen to help control the infectious disease.

Application of nucleic acid aptamer-based lateral flow assay in microbe detection

Microbial contamination and infection are global issues in the food and environmental fields that seriously threaten human health. Bacteria and fungi can easily cause food spoilage, resulting in diarrhea and vomiting;viruses can infect humans through different transmission routes, causing severe or even fatal harm. Hence, rapid analysis and identification of pathogenic microorganisms and simultaneous detection of multiple types of microbes have become hot research topics in biochemical analysis and molecular diagnosis. The lateral flow assay (LFA) is a simple, rapid, economical, and efficient detection technology with high sensitivity, simple operation, and environmental friendliness. It can provide instant test results under non-laboratory circumstances, hence becoming an ideal choice for point-of-care testing, which has been applied to rapidly detect various targets. The current conventional principle of the LFA is still based on the specific recognition of the antigen by the antibody. However, as a commonly used target recognition molecule in conventional biochemical and medical detection, the application of antibodies also has certain limitations for rapid and accurate identification of certain targets due to strict control of the production and purification process, as well as susceptibility to the interference of the operating environment, pH, temperature, and other conditions, such as long production cycle, high cost, poor stability, and cross-reactivity. Aptamers are a class of single-stranded DNA (ssDNA) or RNA obtained through the systematic evolution of ligands by exponential enrichment (SELEX), which can usually form a stable secondary structure. Aptamers can be folded into a three-dimensional structure through conformational change and interact with the target through conformation complementarity, π-π stacking between aromatic rings, base stacking, electrostatic interaction, and hydrogen bonding. So far, nearly 300 kinds of aptamers have been discovered. As alternatives, aptamers are easy and facile to modify and label with high sensitivity and specificity. Accordingly, the innovative rapid detection technique can be developed by combining the LFA with an aptamer. This aptamer-based LFA technology can be widely used in qualitative, semi-quantitative, and quantitative detection in food safety, environment, clinical, and other fields. Nowadays, most microbe detection methods are constructed based on this approach. The common strategies of aptamer-based LFAs include the sandwich method, competitive method, and adsorption–desorption method. Diverse ingenious materials such as gold nanoparticles and quantum dots have also been proposed for signal read-out. Different signal capture models, such as colorimetric and fluorescence methods, have been applied for sensitive and accurate detection of a single or multiple target microbe. Furthermore, in view of the unique properties of nucleic acid aptamers, several signal amplification methods can be further involved in the LFA to enhance the sensitivity for target detection. This review introduces the use of aptamers with different structural patterns and labeling types in recent years, as well as a variety of methods to detect microbes, especially for the rapid detection of pathogenic bacteria. Based on the excellent characteristics, the aptamer-based LFA presents more flexibility and selectivity for microbe detection with good applicability, specificity, and sensitivity and can better achieve low-cost, rapid detection. This study is expected to provide a reference for developing nucleic acid aptamer-based LFA technologies, especially for efficient and accurate diagnosis of corona virus disease 2019 (COVID-19), exploiting the novel application scope of LFA technology. © 2022 Chinese Academy of Sciences. All rights reserved.

Navigating the cellular landscape in tissue: Recent advances in defining the pathogenesis of human disease.

Over the past decade, our understanding of human diseases has rapidly grown from the rise of single-cell spatial biology. While conventional tissue imaging has focused on visualizing morphological features, the development of multiplex tissue imaging from fluorescence-based methods to DNA- and mass cytometry-based methods has allowed visualization of over 60 markers on a single tissue section. The advancement of spatial biology with a single-cell resolution has enabled the visualization of cell-cell interactions and the tissue microenvironment, a crucial part to understanding the mechanisms underlying pathogenesis. Alongside the development of extensive marker panels which can distinguish distinct cell phenotypes, multiplex tissue imaging has facilitated the analysis of high dimensional data to identify novel biomarkers and therapeutic targets, while considering the spatial context of the cellular environment. This mini-review provides an overview of the recent advancements in multiplex imaging technologies and examines how these methods have been used in exploring pathogenesis and biomarker discovery in cancer, autoimmune and infectious diseases.

A Protein Microarray-Based Respiratory Viral Antigen Testing Platform for COVID-19 Surveillance.

High-throughput and rapid screening testing is highly desirable to effectively combat the rapidly evolving COVID-19 pandemic co-presents with influenza and seasonal common cold epidemics. Here, we present a general workflow for iterative development and validation of an antibody-based microarray assay for the detection of a respiratory viral panel: (a) antibody screening to quickly identify optimal reagents and assay conditions, (b) immunofluorescence assay design including signal amplification for low viral titers, (c) assay characterization with recombinant proteins, inactivated viral samples and clinical samples, and (d) multiplexing to detect a panel of common respiratory viruses. Using RT-PCR-confirmed SARS-CoV-2 positive and negative pharyngeal swab samples, we demonstrated that the antibody microarray assay exhibited a clinical sensitivity and specificity of 77.2% and 100%, respectively, which are comparable to existing FDA-authorized antigen tests. Moreover, the microarray assay is correlated with RT-PCR cycle threshold (Ct) values and is particularly effective in identifying high viral titers. The multiplexed assay can selectively detect SARS-CoV-2 and influenza virus, which can be used to discriminate these viral infections that share similar symptoms. Such protein microarray technology is amenable for scale-up and automation and can be broadly applied as a both diagnostic and research tool.

Allosteric aptasensor-initiated target cycling and transcription amplification of light-up RNA aptamer for sensitive detection of protein.

The early detection of biomarker proteins in clinical samples is of great significance for the diagnosis of diseases. However, it is still a challenge to detect low-concentration protein. Herein, a label-free aptamer-based amplification assay, termed the ATC-TA system, that allows fluorescence detection of very low numbers of protein without time-consuming washing steps and pre-treatment was developed. The target induces a conformational change in the allosteric aptasensor, triggers the target cycling and transcription amplification, and ultimately converts the input of the target protein into the output of the light-up aptamer (R-Pepper). It exhibits ultrahigh sensitivity with a detection limit of 5.62 fM at 37 â„ƒ and the accuracy is comparable to conventional ELISA. ATC-TA has potential application for the detection of endogenous PDGF-BB in serum samples to distinguish tumor mice from healthy mice at an early stage. It also successfully detects exogenous SARS-CoV-2 spike proteins in human serum. Therefore, this high-sensitive, universality, easy-to-operate and cost-effective biosensing platform holds great clinical application potential in early clinical diagnosis.

Rapid Optical Biosensing of SARS-CoV-2 Spike Proteins in Artificial Samples.

Tests for SARS-CoV-2 are crucial for the mass surveillance of the incidence of infection. The long waiting time for classic nucleic acid test results highlights the importance of developing alternative rapid biosensing methods. Herein, we propose a fiber-optic biolayer interferometry-based biosensor (FO-BLI) to detect SARS-CoV-2 spike proteins, extracellular domain (ECD), and receptor-binding domain (RBD) in artificial samples in 13 min. The FO-BLI biosensor utilized an antibody pair to capture and detect the spike proteins. The secondary antibody conjugated with horseradish peroxidase (HRP) reacted with the enzyme substrate for signal amplification. Two types of substrates, 3,3'-diaminobenzidine (DAB) and an advanced 3-Amino-9-ethylcarbazole (i.e., AMEC), were applied to evaluate their capabilities in enhancing signals and reaching high sensitivity. After careful comparison, the AMEC-based FO-BLI biosensor showed better assay performance, which detected ECD at a concentration of 32-720 pM and RBD of 12.5-400 pM in artificial saliva and serum, respectively. The limit of detection (LoD) for SARS-CoV-2 ECD and RBD was defined to be 36 pM and 12.5 pM, respectively. Morphology of the metal precipitates generated by the AMEC-HRP reaction in the fiber tips was observed using field emission scanning electron microscopy (SEM). Collectively, the developed FO-BLI biosensor has the potential to rapidly detect SARS-CoV-2 antigens and provide guidance for "sample-collect and result-out on-site" mode.

Non-enzymatic signal amplification-powered point-of-care SERS sensor for rapid and ultra-sensitive assay of SARS-CoV-2 RNA.

The development of rapid and ultra-sensitive detection technology of SARS-CoV-2 RNA for shortening the diagnostic window and achieving early detection of virus infections is a huge challenge to the efficient prevention and control of COVID-19. Herein, a novel ultra-sensitive surface-enhanced Raman spectroscopy (SERS) sensor powered by non-enzymatic signal amplification is proposed for rapid and reliable assay of SARS-CoV-2 RNA based on SERS-active silver nanorods (AgNRs) sensing chips and a specially designed smart unlocking-mediated target recycling signal amplification strategy. The SERS sensing was carried out by a one-pot hybridization of the lock probes (LPs), hairpin DNAs and SERS tags with SARS-CoV-2 RNA samples on an arrayed SERS sensing chip to achieve the recognition of SARS-CoV-2 RNA, the execution of nuclease-free unlocking-mediated target recycling signal amplification, and the combination of SERS tags to generate SERS signal. The SERS sensor for SARS-CoV-2 RNA can be achieved within 50 min with an ultra-high sensitivity low to 51.38 copies/mL, and has good selectivity in discriminating SARS-CoV-2 RNA against other respiratory viruses in representative clinical samples, which is well adapted for rapid, ultra-sensitive, multi-channel and point-of-care testing of viral nucleic acids, and is expected to achieve detection of SARS-CoV-2 infection in earlier detection windows for efficient COVID-19 prevention and control.

Hydrophilic rhodamine B-loaded / boronic acid-modified graphene oxide nanocomposite as a substitute of enzyme-labeled second antibody for ultrasensitive detection of antibodies.

Enzyme-labeled secondary antibody is often used to amplify the output signal in the process of antibody detection. However, its preparation process is complex and time-consuming. Herein, we fabricated an innovative hydrophilic rhodamine B-loaded / boronic acid-modified graphene oxide (HRBGO) nanocomposite, used as a substitute of enzyme-labeled second antibody. The synthetic HRBGO was loaded with generous rhodamine B and modified with boronic acid. Therefore, the HRBGO could selectively label the carbohydrate chains of Fc fragment of primary antibody through specific boronate affinity recognition, and then perform signal output and amplification by releasing rhodamine B. To verify the practicability of HRBGO, trastuzumab as a humanized monoclonal antibody targeting human epidermal growth factor receptor-2 (HER2) was selected as model antibody. A glycosylation site-blocked / HER2-immobilized magnetic nanoparticles (GHMN) was also prepared for selectively capturing trastuzumab from complex samples via specific immunoaffinity. Because the glycosylation sites of HER2 can also be labeled with the HRBGO by boronate affinity recognition, these sites were blocked by a masking agent to minimize the background signal. For specific and ultrasensitive detection of trastuzumab, the integration of GHMN and HRBGO was proposed and optimized in detail. Trastuzumab detection based on HRBGO consisted of three steps: specific capture, selective labeling, and output signal. The proposed strategy provided ultrahigh sensitivity with limit of detection of 0.35 fg mL-1 and was successfully applied in the detection of trastuzumab in spiked serum sample with recovery and relative standard deviation in the range of 98.7-103.8% and 3.8-6.0%, respectively. To assess universal applicability, the HRBGO was also successfully used for the determination of anti-SARS-COV2 RBD antibody in human serum sample.

Target-triggered cascade signal amplification for sensitive electrochemical detection of SARS-CoV-2 with clinical application.

The spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has led to the outbreak of the 2019 coronavirus (COVID-19) disease, which greatly challenges the global economy and health. Simple and sensitive diagnosis of COVID-19 at the early stage is important to prevent the spread of pandemics. Herein, we have proposed a target-triggered cascade signal amplification in this work for sensitive analysis of SARS-CoV-2 RNA. Specifically, the presence of SARS-CoV-2 RNA can trigger the catalytic hairpin assembly to generate plenty of DNA duplexes with free 3'-OH termini, which can be recognized and catalyzed by the terminal deoxynucleotidyl transferase (TdT) to generate long strand DNA. The prolonged DNA can absorb substantial Ru(NH3)63+ molecules via electrostatic interaction and produce an enhanced current response. The incorporation of catalytic hairpin assembly and TdT-mediated polymerization effectively lowers the detection limit to 45 fM, with a wide linear range from 0.1 pM to 3000 pM. Moreover, the proposed strategy possesses excellent selectivity to distinguish target RNA with single-base mismatched, three-base mismatched, and random sequences. Notably, the proposed electrochemical biosensor can be applied to analyze targets in complex circumstances containing 10% saliva, which implies its high stability and anti-interference. Moreover, the proposed strategy has been successfully applied to SARS CoV-2 RNA detection in clinical samples and may have the potential to be cultivated as an effective tool for COVID-19 diagnosis.

Sensitive fluorescence detection of pathogens based on target nucleic acid sequence-triggered transcription.

Accurate identification of mutant pathogens derived from genetic polymorphisms is highly desired in clinical diagnosis. However, current detection methods based on Watson-Crick hybridization suffers from false positives due to the cross-reactivity of wild-type sequences. In this study, we developed an accurate identification of mutant pathogens by combining programmable DNAzyme and target nucleic acid sequence-triggered transcription. Single nucleotide variants (SNVs) are the most plentiful type of mutations in the genome. High specificity to discriminate SNV was first achieved by rational design of dual-hairpin DNA structure and DNAzyme's capability of site-specific cleavage. T7 RNA polymerase-mediated transcription amplification was introduced to exponentially increase the sensitivity by encompassing T7 promoter sequence into the dual-hairpin DNA structure. The design of this biosensor is fast and straightforward without many computational steps, and the highly sensitive biosensor can detect not only SNVs but also occasional insertions and large deletions in the genome. We showed that the assay could rapidly detect COVID-19 variant and methicillin-resistant Staphylococcus aureus (MRSA), and the limit of detection is 0.96 copy/µL. The modular design of functional DNA enables this biosensor be easily reconfigured and is useful diagnosis of emerging infectious diseases caused by mutant pathogens.

Quantum dots assembly enhanced and dual-antigen sandwich structured lateral flow immunoassay of SARS-CoV-2 antibody with simultaneously high sensitivity and specificity.

Exploring reliable and highly-sensitive SARS-CoV-2 antibody diagnosis by point-of-care (POC) manner, holds great public health significance for extensive COVID-19 screening and controlling. Unfortunately, the currently applied gold based lateral flow immunoassay (GLFIA) may expose both false-negative and false-positive interpretations owing to the sensitivity and specificity limitations, which may cause significant risk and waste of public resources for large population screening. To simultaneously overcome the drawbacks of GLFIA, a novel fluorescent LFIA based on signal amplification and dual-antigen sandwich structure was established with largely improved sensitivity and specificity. The compact three-dimensional incorporation of hydrophobic quantum dots within dendritic affinity templates and multilayer surface derivation guaranteed a high and robust fluorescence of single label, which lowered the false negative rate of GLFIA prominently. A dual-antigen sandwich structure using labeled/immobilized SARS-CoV-2 spike receptor binding domain antigen for capturing total human SARS-CoV-2 antibody was developed, instead of general indirect antibody capturing approach, to reduce the false positive rate of GLFIA. Over 300 cases of COVID-19 negative and 97 cases of COVID-19 positive samples, the current assay revealed a 100% sensitivity and 100% specificity confirmed by both polymerase chain reaction (PCR) and chemiluminescence immunoassay (CLIA), compared with the considerable misinterpretation cases by currently applied GLFIA. The quantitative results verified by receiver operating characteristic curve and other statistical analysis indicated a well-distinguished positive/negative sample groups. The proposed strategy is highly sensitive towards low concentrated SARS-CoV-2 antibody serums and highly specific towards serums from COVID-19 negative persons and patients infected by other viruses.

SARS-CoV-2 RNA Detection with Duplex-Specific Nuclease Signal Amplification.

The emergence of the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a zoonotic pathogen, has led to the outbreak of coronavirus disease 2019 (COVID-19) pandemic and brought serious threats to public health worldwide. The gold standard method for SARS-CoV-2 detection requires both reverse transcription (RT) of the virus RNA to cDNA and then polymerase chain reaction (PCR) for the cDNA amplification, which involves multiple enzymes, multiple reactions and a complicated assay optimization process. Here, we developed a duplex-specific nuclease (DSN)-based signal amplification method for SARS-CoV-2 detection directly from the virus RNA utilizing two specific DNA probes. These specific DNA probes can hybridize to the target RNA at different locations in the nucleocapsid protein gene (N gene) of SARS-CoV-2 to form a DNA/RNA heteroduplex. DSN cleaves the DNA probe to release fluorescence, while leaving the RNA strand intact to be bound to another available probe molecule for further cleavage and fluorescent signal amplification. The optimized DSN amount, incubation temperature and incubation time were investigated in this work. Proof-of-principle SARS-CoV-2 detection was demonstrated with a detection sensitivity of 500 pM virus RNA. This simple, rapid, and direct RNA detection method is expected to provide a complementary method for the detection of viruses mutated at the PCR primer-binding regions for a more precise detection.

A label-free electrochemical assay for coronavirus IBV H120 strain quantification based on equivalent substitution effect and AuNPs-assisted signal amplification.

A label-free electrochemical strategy is proposed combining equivalent substitution effect with AuNPs-assisted signal amplification. According to the differences of S1 protein in various infectious bronchitis virus (IBV) strains, a target DNA sequence that can specifically recognize H120 RNA forming a DNA-RNA hybridized double-strand structure has been designed. Then, the residual single-stranded target DNA is hydrolyzed by S1 nuclease. Therefore, the content of target DNA becomes equal to the content of virus RNA. After equivalent coronavirus, the target DNA is separated from DNA-RNA hybridized double strand by heating, which can partly hybridize with probe 2 modified on the electrode surface and probe 1 on AuNPs' surface. Thus, AuNPs are pulled to the surface of the electrode and the abundant DNA on AuNPs' surface could adsorb a large amount of hexaammineruthenium (III) chloride (RuHex) molecules, which produce a remarkably amplified electrochemical response. The voltammetric signal of RuHex with a peak near - 0.28 V vs. Ag/AgCl is used as the signal output. The proposed method shows a detection range of 1.56e-9 to 1.56e-6 µM with the detection limit of 2.96e-10 µM for IBV H120 strain selective quantification detection, exhibiting good accuracy, stability, and simplicity, which shows a great potential for IBV detection in vaccine research and avian infectious bronchitis diagnosis. Graphical abstract.

Controlled copper in situ growth-amplified lateral flow sensors for sensitive, reliable, and field-deployable infectious disease diagnostics.

A polyethyleneimine (PEI)-assisted copper in-situ growth (CISG) strategy was proposed as a controlled signal amplification strategy to enhance the sensitivity of gold nanoparticle-based lateral flow sensors (AuNP-LFS). The controlled signal amplification is achieved by introducing PEI as a structure-directing agent to regulate the thermodynamics of anisotropic Cu nanoshell growth on the AuNP surface, thus controlling shape and size of the resultant AuNP@Cu core-shell nanostructures and confining free reduction and self-nucleation of Cu2+ for improved reproducibility and decreased false positives. The PEI-CISG-enhanced AuNP-LFS showed ultrahigh sensitivities with the detection limits of 50 fg mL-1 for HIV-1 capsid p24 antigen and 6 CFU mL-1 for Escherichia coli O157:H7. We further demonstrated its clinical diagnostic efficacy by configuring PEI-CISG into a commercial AuNP-LFS detection kit for SARS-CoV-2 antibody detection. Altogether, this work provides a reliable signal amplification platform to dramatically enhance the sensitivity of AuNP-LFS for rapid and accurate diagnostics of various infectious diseases.